Chemona

Colour Protector

Colour Protector

Colour Protector Coat is a protective lacquer varnish sealer to prevent aging and chalking of car paints and rubber. Colour Protector Coat is silicone free. Colour Protector Coat is a petroleum based substance with water and sun protection properties for car paint. Once the paintwork is coated, Colour Protector Coat will provide the surface about 2-3 years protective result on the paintwork.

Chemona_Product_ColourProtector.jpg

Purpose

Colour Protector Coat seals in one treatment. Colour Protector Coat is used for coating of automotive paints and which are in relatively good condition. It contains a high concentration of Nano particles for optimal protection. Dirt no more adheres to the surface and easily removed with water and the conditioner.

Advantages

  • Protects against aging, yellowing and chalking.
  • Dirt no longer adheres to the substrate and is easily removed.
  • Less maintenance and cleaning.
  • Brings back the original color.
  • Easy application.

Applications

  • Car paintworks.
  • Inflatables.

Key features

  • Treated parts are very well protected against the adhesion of dirt.
  • UV filter prevents discoloration.
  • Discolored components regain their original color.
  • Product is Silicon (SIO2) free.
  • The applied Nano coating provides an exceptionally long-lasting protection against contamination.

To remove any deposit and/or grease, we recommend the following steps:

Cleaning procedure

  • Shake Cleaner well before use.
  • Apply using a spray.
  • Clean with a soft cloth, sponge or brush.
  • If necessary, rinse with water and dry large areas with a wiper.

Protection

After drying, apply Colour Protection Coat preferably with a cotton cloth or soft sponge. Bring a little of the product to the cloth or sponge and rub the part to treat in a circular motion.

Leave surface approx. 3-5 minutes to dry. After drying the surface can optionally be cleaned with a cotton cloth or a micro fiber cloth.

Color and gloss

Milky, dries colorless (no cover), invisible

Packaging

1 liter bottle, 5 and 10 liter jerry can.

Coverage

On a smooth surface is the consumption approx.. 100 ml per 16m2 (one layer). The specified quantity is a target value. Depending on the nature of the substrate and process it may differ. Exact values for each project can be determined by painting test areas.

Colour Protector Coat 50ml.jpg